Acer Ipimbar Rev 102a Manual Top |best| Review

Insert matching pairs into alternating colored slots (Slots 1 & 3, or Slots 2 & 4).

Here is the standard for that header (viewed from above, with the board mounted in a case):

Upgrading to a SATA III SSD (Solid State Drive) is the single most effective upgrade you can perform for overall system speed. The B75 chipset includes one native SATA III 6Gb/s port, which should be used for the boot drive. acer ipimbar rev 102a manual top

1 x PCIe x16 (v3.0 with Ivy Bridge; v2.0 with Sandy Bridge). 3 x PCIe x1 (v2.0).

A 19-pin shrouded rectangular connector positioned vertically near the 24-pin ATX power block. It provides native SuperSpeed processing directly via the Intel B75 chipset to the front IO panel. Insert matching pairs into alternating colored slots (Slots

If you require original driver files or specific microcode updates, enter your system's serial number or SNID directly on the Official Acer Support Center to look up remaining archive links.

Find the 3-pin jumper labeled CLR_CMOS near the round CR2032 coin battery. 1 x PCIe x16 (v3

4 x DDR3 DIMM slots (Dual-Channel, up to 16GB/32GB dependent on BIOS, 1333/1600 MHz) 1 x PCI Express 3.0 x16, 3 x PCI Express 2.0 x1 Storage 2 x SATA III (6 Gb/s) ports, 4 x SATA II (3 Gb/s) ports Audio Realtek High Definition Audio (Integrated) Networking Realtek Gigabit Ethernet Lan (RJ-45) Front Panel Header Pinout (F_PANEL)