The Bradex BX60 is versatile, often supporting both 6V and 12V systems. Ensure the selector switch on the front panel matches the voltage of the battery you are charging. Step 2: Connect the Clamps
The Bradex BX60 is a high-quality, no-nonsense battery charger that, when used correctly, will provide reliable service for many years. By understanding its simple analog operation, following all safety instructions meticulously, and performing routine maintenance, you can ensure both your safety and the long life of your vehicle's batteries.
A high initial reading on the gauge is normal. As the battery fills up, the needle will drop toward zero, signaling a full charge. 5. Disconnect Safely Once the battery is charged: the charger from the wall first. Remove the Black (Negative) clamp Remove the Red (Positive) clamp Pro-Tips for Longevity Avoid Overcharging: bradex bx60 battery charger instructions high quality
By following these instructions, you ensure the longevity of both your Bradex BX60 and your vehicle's battery. Proper charging doesn't just start your car; it saves you money by preventing premature battery failure.
Check that the clamps have a "bite" into the metal of the terminals. Corrosion often acts as an insulator. The Bradex BX60 is versatile, often supporting both
: The current meter will never drop to absolute zero. Even a fully charged battery will draw a very small "maintenance" or "trickle" current from an active charger. Your goal is to disconnect when the needle has settled.
Best for maintaining a battery over long periods or reviving deeply discharged batteries safely. By understanding its simple analog operation, following all
Connect the to the negative terminal of the battery (or to the chassis/engine block if removing the battery is not possible).