Cwfl-6000 Manual -

Use the and ▼ buttons to adjust the temperature to your desired setpoint (typically 22°C to 25°C for fiber lasers). Press RST to confirm and exit. 4. Routine Maintenance Checklist

This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.

Up to 14.1kW to 15kW (depending on operating conditions) Power Supply: 3-phase 380V (50Hz or 60Hz)

Place the chiller in a well-ventilated indoor area. Maintain at least 1.5 meters of clearance from the air outlet (top/back) and 1 meter from the air inlets (side grills). cwfl-6000 manual

Ensure all connections are tightly sealed with pneumatic fittings or hose clamps to prevent micro-leaks near sensitive high-voltage laser components. 4. Electrical and Wiring Instructions

Use the and Down arrows to navigate to the desired temperature setting.

The serves as the definitive reference guide for deploying, operating, and troubleshooting the TEYU S&A CWFL-6000 Dual-Temperature Water Chiller Use the and ▼ buttons to adjust the

Press and hold the and "▲" buttons simultaneously for 5 seconds until 0 or a password prompt appears.

Because the CWFL-6000 is a mass-produced OEM product, manufacturers rarely host manuals on a single "official" website. Use these reliable sources:

This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later. Routine Maintenance Checklist This public link is valid

Pour water slowly until the indicator needle reaches the (Normal level).

To change parameters or switch to :

What (IPG, Raycus, Maxphotonics) are you pairing with the chiller? Are you facing a specific error code right now?