Daikin Brc1c51 61 Installation Manual __link__ Here

The total wiring length between the indoor unit and remote controller should not exceed 5. Initial Setting & Configuration

: Ensure the main power is on and the wiring is correctly connected to the indoor unit's PCB.

: Connect the two-core remote controller wire to terminals P1 and P2 on the controller's PCB. These terminals are not polarity sensitive , meaning the wires can be connected in either position.

Press the to save and lock in the new settings. daikin brc1c51 61 installation manual

The Daikin BRC1C51 (often referred to in conjunction with the BRC1C61 series) is a versatile, wired remote controller designed for Daikin split and sky-air indoor units. It provides precise control over temperature, fan speed, operation modes, and scheduling.

Additional functions, including timer settings, filter sign reset, and inspection modes, are typically accessed by opening a lower panel on the controller.

⚡ Daikin provides installation manuals for the BRC1C61; however, the wiring schematic for the actual connection of the controller is delivered inside the indoor unit's installation manual , not the controller's box. Always refer to the indoor unit's wiring diagram for terminal identification. The total wiring length between the indoor unit

Upon powering up, the controller screen will display or a blinking circle icon. This indicates that the remote controller is actively scanning the P1/P2 network to discover the indoor unit(s) and assign automatic addresses. This process takes 1 to 3 minutes. Do not press any buttons while this auto-check is running. 5. Field Settings Mode (Advanced Adjustment)

Choose a suitable wall location, approximately 1.5m (5ft) above the floor.

Use putty (field supply) to seal the wiring lead-in hole to prevent dust, insects, or moisture from entering the controller. 2.3. Attaching the Controller These terminals are not polarity sensitive , meaning

The Daikin BRC1C51/61 installation manual outlines procedures for mounting, wiring, and configuring the wired remote controller, focusing on securing it to a flat, dust-free surface. Key steps include separating control lines from high-voltage cables, avoiding wire pinching, and configuring field settings—such as sensor activation via the test button—to ensure accurate temperature management. For the full installation manual, visit the Daikin Manual Library . Daikin Manual User BRC1C51 61 | PDF | Air Conditioning

Ensure all accessories from the manual are present, including the backplate, screws, and drywall anchors. 2. Installation Procedures for BRC1C51/61 Follow these steps to mount the controller securely: 2.1. Installing the Backplate