Calibrates the physical position of the print head to fix alignment shifts, banding lines, or blurry output.
Once this digital counter hits 100% capacity, the printer enters a lock state for safety. This prevents waste ink from overflowing, leaking out of the machine, and damaging your desk or the internal electronic circuits.
5. Click the "OK" button to enter the main menu. 6. In the Maintenance section, locate the "Waste ink pad counter" option and click it. epson l6170 adjustment program work
Before attempting to use any adjustment software, you must complete these physical steps:
Forces a heavy, system-wide ink priming sequence through the tubes (useful after replacing a printhead). Calibrates the physical position of the print head
Check the boxes next to Main Pad Counter and Platen Pad Counter , then click the Check button. The software will display your current points and percentage usage.
The program prompts the user to turn off the printer hardware. Powering the machine back on allows the mainboard to load the newly cleared firmware parameters, completing the loop. Critical Hardware Maintenance After a Reset In the Maintenance section, locate the "Waste ink
Epson officially recognizes the waste ink pad issue.
Used when replacing the print head to sync the new hardware with the logic board.
A prompt appears on the screen reading: "Please turn off the printer." The user must physically press the power button on the L6170. This power cycle forces the printer's mainboard to reboot, clear its temporary cache, and read the newly modified EEPROM values. When turned back on, the error lights disappear, and full functionality is restored. The Critical Risk: Physical vs. Digital Maintenance