The system must be securely grounded to the aircraft chassis. 4. Wiring and Avionics Integration
Pivot the mechanical radar base completely to the right-hand position.
Secure the RTA mounting rack to the airframe using the approved structural mounting points. Ensure proper grounding of the rack to the airframe. gwx 75 installation manual
The GWX 75 supports 10, 12, or 14-inch antennas. Installation of the correct antenna size depends on the specific nose cone diameter and available space.
The mandates extensive testing to ensure safety. Ground Test The system must be securely grounded to the aircraft chassis
Fix: Check the ARINC 429 heading/attitude input configuration. The radar is not receiving real-time pitch and roll data from the AHRS, or the stabilization setting is turned off in the user menu.
: Supports pitch-and-roll stabilization and altitude-compensated tilt (ACT) when interfaced with the aircraft's AHRS. Scan Range Secure the RTA mounting rack to the airframe
Critical Maximum Permissible Exposure Level (MPEL) boundaries—ensure a 12ft-16ft safety radius depending on your antenna size (10”, 12”, or 14”).
Available in various sizes (typically 10-inch or 12-inch plates) depending on the aircraft nose cowl clearance.
- Necessary for legal installation compliance.
Use appropriate gauge wiring to connect to the aircraft’s avionics bus.