Huawei Lual02 Firmware Flash File Mt6735m Dead Hang Logo Done Repack Work Jun 2026

The (often known as the Huawei Y3II or Y3 2016) is powered by the MediaTek MT6735M chipset. A common issue with this device is becoming dead (no response after flash) or hanging on the Huawei logo due to corrupted preloader, wrong firmware version, or a failed OTA update.

This method works well for general bootloops but often fails on phones that are completely "dead."

Huawei LUAL02 Processor: MediaTek MT6735M Issue: Dead Boot, Hang on Logo, or Stuck in Bootloop Solution: Repartition / Flash with Stock ROM The (often known as the Huawei Y3II or

Hold the (or Volume Up) button and connect the phone to the PC via a USB cable.

A “Download OK” only confirms the tool wrote partitions it was instructed to — it doesn’t guarantee correct boot content. Try the following: A “Download OK” only confirms the tool wrote

: Ensure the device battery contains at least a 30% charge .

This article is for educational and professional repair purposes. Huawei, MediaTek, and their respective trademarks are property of their owners. Always comply with local laws regarding firmware modification and IMEI handling. wrong firmware version

Click the green button at the top of the SP Flash Tool interface. The tool will enter a standby state, waiting for the device connection.

(But for MT6735M, use raw format: simg2img stock_system.img system.raw )