: The actuator (sold separately, typically the GS-A22) must be aligned within the specified detection range. The GS-11PC features a large alignment tolerance to accommodate sagging doors.
Proper alignment between the sensor main unit and the actuator is crucial to prevent nuisance trips and ensure safety compliance. Sensing Distance Assured Operating Distance ( Saocap S sub a o
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later. keyence gs-11pc manual
Regularly check for contaminants that may interfere with the non-contact sensor.0;992; Disposal: Dispose of as industrial waste. 0;2a;
The reading drifts by 5µm over an hour. : The actuator (sold separately, typically the GS-A22)
The GS-11PC isn't just a simple on/off switch. The manual outlines a deep menu system accessed by holding the . Here are the parameters you will likely need to adjust:
Here are three real-world issues that the manual directly resolves: Sensing Distance Assured Operating Distance ( Saocap S
Supports "Low" (any GS actuator) or "High" (unique pairing) coding levels to prevent tampering.
1 x PNP transistor output (Non-safety, max 50 mA) Supply Voltage: 24 VDC ±plus or minus 10% (Ripple P-P 10% or less, Class 2) Power Consumption: Under 1.5 W Risk Time (Response Time): Max 20 ms (From ON to OFF) Enclosure Rating: IP65 / IP67 / IP69K (IEC 60529)
): 10 mm (The distance at which the switch is guaranteed to turn ON). Assured Releasing Distance ( Sarcap S sub a r end-sub