Konica Minolta Bizhub C258 Factory Reset Jun 2026

is stuck on a trouble code (like C-XXXX), you may need to reset the trouble counter, not the factory settings. Open the front door. Turn off the main power.

Re-upload your saved CSV address book to immediately restore scanning functionality for office personnel.

To perform a factory reset on your Konica Minolta Bizhub C258, follow these steps:

This is the most thorough method to revert the Konica Minolta Bizhub C258 to factory default settings. Step 1: Enter Service Mode Press the button. Press the [Utility/Counter] button. konica minolta bizhub c258 factory reset

Keep holding the button until a black dot or an "hourglass" appears in the top-right corner of the display.

: If the touchscreen lacks tutorial animations after a deep reset, the animation data on the HDD was wiped. This must be reloaded via a USB flash drive containing the specific bizhub C258 firmware file.

A factory reset is irreversible. It is vital to protect your data and ensure you have the necessary access rights. is stuck on a trouble code (like C-XXXX),

A full initialization will clear all user data, including stored documents, account tracks, and network configurations. Method 1: Initializing (Factory Reset) via Service Mode

If the progress bar freezes for more than 30 minutes, the Hard Disk Drive (HDD) might be failing. You may need to enter Service Mode again and perform a separate physical HDD Format.

Method 1: Initializing Settings via Utility Mode (Recommended) Re-upload your saved CSV address book to immediately

If you need a complete, deep-level factory reset, you must use the service mode. Press . Tap [Display Keypad] (if not already visible). Press [Stop] →right arrow [0] →right arrow [0] →right arrow [Stop] →right arrow [0] →right arrow [1] .

Enter the administrator password (default is typically or 00000000 ). Navigate to [System Settings] → [Reset Settings] . Select the specific settings you wish to reset. Troubleshooting: "Trouble Reset" (Fixing Error Codes)