Navair 1715bad1 Battery Manual -
: The manual defines specific parameters for "Constant Potential" charging. For example, 24V batteries are typically charged until the voltage holds constant at 28.5 volts and current tapers to approximately 1–3 amps. Battery Capacity & Discharge
| Interval | Action | Reference | |----------|--------|-----------| | Monthly | Visual inspection for swelling, corrosion, or cracks | Section 4.2 | | Quarterly | Voltage check (loaded at 1.0 A for 5 seconds) | Section 4.3 | | Annually | Capacity test – replace if <80% rated Ah | Section 4.4 | | 24 months | Mandatory replacement (Ni-Cd) or condition-based (Li-Ion) | Section 1.7 |
The "17" in the numerical designation indicates the Power Plant category (Navy Standard Subject Identification Codes), while "15" refers to the specific sub-category of batteries and auxiliary power units. navair 1715bad1 battery manual
NAVAIR manuals are updated frequently via Interim Technical Directives (ITDs) and formal revisions. Maintenance shops must ensure they are not working off an obsolete version.
The is a technical publication issued by the Naval Air Systems Command (NAVAIR) that provides comprehensive instructions for the handling, storage, maintenance, testing, and servicing of aircraft storage batteries used by the U.S. Navy and Marine Corps. This manual is the definitive guide for maintenance personnel working with aviation batteries. : The manual defines specific parameters for "Constant
If you need further details on this technical publication, please specify your requirements: Do you need specific or tool part numbers ?
: Minimizes the risks of thermal runaway, acid/alkali burns, and explosive gas generation. Key Battery Technologies Covered NAVAIR manuals are updated frequently via Interim Technical
: Information on how to charge the batteries properly, types of charging (e.g., float charging, rapid charging), and procedures for conducting capacity tests to assess battery health.
: Specific time and amperage settings for capacity tests (e.g., a 60 amp-hour battery discharged at 50 amps for 72 minutes). 3. Safety and Storage Requirements
