Radio Set Hx Prc 6020 Technical Data Install [work] -

Installing the HX PRC 6020 involves assembling the man-pack configuration for field use. 3.1 Unpacking and Inspection

2,850,000 discrete channels with an ultra-fine 10 Hz spacing interval.

Plug the hand microphone or headset into the on the radio's front panel. Ensure the connector is fully seated and its locking ring is tightened to maintain a waterproof seal. radio set hx prc 6020 technical data install

Roughly 360 mm x 255 mm x 100 mm or less, facilitating a streamlined man-pack footprint.

Attach the control microphone or headset to the Audio Connectors located on the front panel. Installing the HX PRC 6020 involves assembling the

Align and connect the tactical audio handset (typically H-250 style) or a headset into the primary audio/data socket.

Features an integrated single-tone modem supporting data transmission speeds up to 4800 bps, alongside digital vocoders operating at 2400 or 1200 bps. 4. Installation and Setup Procedure Ensure the connector is fully seated and its

: Features scalable transmission modes ranging across 5W, 10W, and 20W options. This variable control permits low-power operations to limit the radio's electronic signature or high-power bursts for long-range communication.

| Category | Specification | | :--- | :--- | | | 1.5000 to 29.9999 MHz (HF band) | | Number of Channels | 2,850,000 channels at 10 Hz spacing | | Modulation Types | Upper Side Band (USB), Lower Side Band (LSB), Amplitude Modulation (AM) | | RF Output Power | User-selectable: 5W, 10W, or 20W | | Receiver Sensitivity | -110 dBm (for 10 dB SINAD) | | Power Supply (Primary) | Non-rechargeable 12V, 15Ah Lithium Sulphur Dioxide (LiSO₂) battery pack | | Power Supply (Secondary) | Rechargeable 14.4V, 18Ah Lithium-Ion (Li-Ion) battery pack | | Operating Temperature | -40°C to +55°C (battery dependent) | | Environmental Compliance | MIL-STD-810 E/F for humidity, salt fog, vibration, and shock |

Upper Sideband (USB), Lower Sideband (LSB), and Amplitude Modulation (AM).

Features full MIL-STD-188-141A ALE compatibility. The radio scans preprogrammed frequency pools to automatically establish the cleanest available link within 2.5 to 4.5 seconds without operator intervention.