Realunix Pro Hg680p Install //free\\ Info
While holding the reset button, plug the other end of the USB cable into the USB port nearest to the HDMI port on the box.
Because RealUnix Pro supports multiple Amlogic devices, you must specify the correct Device Tree Blob (DTB) file for the HG680-P to boot.
On the right-hand panel, ensure "Erase Flash" and "Erase Bootloader" are checked (Standard setting is "Normal Erase"). Step 2: Connecting the HG680P to your PC realunix pro hg680p install
Click and wait for the process to complete successfully. Step 2: Configure the Device Tree Blob (DTB)
Ensure the HG680P is completely unplugged from its power adapter. While holding the reset button, plug the other
Select your target MicroSD card/USB drive from the device list.
Locate the file named gxl_p212_2g.dtb (the specific profile for the HG680-P's S905X architecture). Copy this file to the root directory of the boot partition. Step 2: Connecting the HG680P to your PC
: In the tool, ensure "Erase Flash" and "Erase Bootloader" are checked (though default settings usually suffice). Click Start . Connect the STB : Keep the STB powered off.
Post Comment