: Changing or altering an IMEI number is illegal in many jurisdictions. This tool should only be used for repair and restoration of the original IMEI that belongs to the device.
Install the USB drivers to ensure your computer recognizes the phone's chipset.
To use the Spreadtrum IMEI Tool V4.1, follow these standard procedures: :
: Click the Write button. Once the process is finished, a "PASS" message will indicate a successful repair. Important Considerations Spreadtrum Imei Tool V4.1
Before launching the software, some initial setup is required on your Windows PC.
In all these cases, the is often the only free solution that works without expensive JTAG or box programmers.
Once completed, restart the device and dial *#06# to verify the restored IMEI. : Changing or altering an IMEI number is
To help me tailor any troubleshooting steps, could you tell me: The of your Spreadtrum/Unisoc device?
Type your valid 15-digit IMEI numbers into the corresponding fields. Note: Use the IMEI number associated with your specific device, usually found on the back housing or packaging. 3. Connect the Device Turn off your Spreadtrum device. Connect the device to the computer using the USB cable.
Ensure the device has at least 50% battery to prevent shutdown during the process. Step-by-Step Guide: How to Use Spreadtrum IMEI Tool V4.1 Follow these steps to flash or repair your IMEI. 1. Install Drivers and Open the Tool To use the Spreadtrum IMEI Tool V4
When refurbishing a phone with a completely dead motherboard, technicians sometimes swap the NAND/eMMC chip. Without the original IMEI, the phone cannot register on mobile networks.
Once the tool recognizes the device (usually indicated by a port number appearing in the tool), click on the or "Write" button.