Thyssenkrupp Levant Stair Lift Installation — Manual Full __hot__

Drive the lift to the absolute top or bottom until it chirps and stops. Intermittent stopping Dirt or obstruction in the gear rack Clean the teeth of the gear rack with a stiff nylon brush. Lift runs slow / stops Batteries are depleted or dead

Stair lift installation and Space Requirements For Your Home

Flip the main switch ON; Insert and turn the key; Check internal battery terminal connections. Obstruction on the stairs striking a safety edge. Reverse direction, clear the obstacle, and try again. Beeping sound when parked Lift is not making contact with charging strips. thyssenkrupp levant stair lift installation manual full

Swivel the seat while trying to operate the armrest toggle. The lift must refuse to move.

If the chair won't move, ensure the seat is swiveled back to its initial position. Drive the lift to the absolute top or

Adjustable supports that anchor the rail to the steps.

Set the distance between the rail and the wall (typically 5 to 7 inches, depending on wall obstructions like handrails). Step 3: Anchoring the Rail Obstruction on the stairs striking a safety edge

Disengage the seat swivel lock; the lift must refuse to move.

Install the upper and lower mechanical end stops immediately.