Compatible with 32" panels needing Android TV updates.
The LED indicator (Red/Blue) will start flashing rapidly. This means the update has started.
is a versatile "three-in-one" smart TV motherboard, commonly found in many budget and mid-range Android LED TVs, including brands like Aiwa, Arielli, and various generic models. Featuring 1G DDR RAM and 8G eMMC storage, this mainboard drives both the display and the LED backlight, making it a crucial component for TV operation.
If the TV does not respond to USB (no blinking light, stays black, or the USB update fails), the eMMC chip is likely or the bootloader is completely destroyed. In this case, you need an EMMC dump and a hardware programmer. Tp.mt5510s.pb803 Firmware
The NAND flash is typically partitioned into the following segments:
Need specific files? Join the MT5510 Hardware Repair community on Discord or XDA – mention your board’s silk screen codes and boot log (via UART). Do not ask for direct firmware links in comments to respect copyright.
Unlike high-end TVs, the firmware for these reference boards is rarely, if ever, officially released by the manufacturer. This is because smaller brands buy these mass-produced reference designs from a manufacturer (like MStar or MediaTek) and rebrand them. Consequently, no "Goldvision" or "Awox" central support site for these boards exists. Compatible with 32" panels needing Android TV updates
| Error Message | Cause | Fix | |---------------|-------|-----| | STATUS_BROM_CMD_SEND_DA_FAIL (0xC0060003) | Wrong USB driver or preloader mismatch | Reinstall VCOM driver, try another USB port (USB 2.0 preferred) | | S_BROM_DOWNLOAD_DA_FAIL (0x7D4) | Board is not in download mode | Short test point correctly; battery must be >30% | | STATUS_SECURITY_SECURE_CFG_DOWNLOAD_NOT_ALLOW | Bootloader locked | Use SP Flash Tool’s “Write Memory” tab with auth file (hard – requires vendor unlock) | | Checksum mismatch after flash | Corrupted firmware download | Re-download from another source; verify MD5 |
On many TP.MT5510S.PB803 boards:
Which deliverable would you like next?
The board uses an eMMC chip to hold its core partitions, containing the bootloader, kernel, recovery environment, and Android system image. Common Symptoms of Firmware Corruption
Download the specific firmware binary archive corresponding to your TV brand and panel model. Extract the .bin firmware file directly onto the of your flash drive. Do not store it inside any folders or sub-folders, and ensure the filename remains unaltered. Step 3: Connect and Initialize