Products like (not widely available) or a DIY ESP8266/ESP32 that listens for a secure signal (HTTPS/MQTT) and sends magic packet on LAN. This eliminates need for router forwarding.
Let’s break down the keyword:
Because standard routers do not broadcast these packages across different subnets or over the internet for security reasons, AnyDesk handles cross-network routing through a proxy device strategy : wake on lan anydesk hot
While incredibly useful, Wake-on-LAN has security implications that must be considered.
The configuration above works well within a local network (LAN). To wake a computer from outside your home/office network (via WAN), you will need to: Products like (not widely available) or a DIY
Now for the AnyDesk-specific setup on the remote computer (the one you want to wake up).
For some motherboards, you may also need to disable ErP (Energy-related Products) mode, as this cuts power to the network card during shutdown. The configuration above works well within a local
: Go to Control Panel → Power Options → Choose what the power buttons do → Uncheck Turn on fast startup . Wake up a device remotely - AnyDesk Help Center
AnyDesk makes this relatively easy if you have a second always-on device on the same network (like a Raspberry Pi, router, or another PC). But for , we need a workaround.
Enable settings such as , Power on by PCI-E , or Remote Wake Up . 2. Operating System Settings (Windows)