Wella Climazon Millenium Manual Install ((full)) -

Slide the device head onto the arm's pin and secure it with the provided safety caps to prevent electrical shock or mechanical detachment. Initial Setup & Controls

Use the designated hex screws to secure the head to the arm.

Use a minimum 10A dedicated circuit breaker to prevent overloads.

Re-tighten the base bolts connecting the pillar to the wheelbase. wella climazon millenium manual install

Users highly praise the unit's quiet operation compared to traditional hood dryers, making it easier for clients to talk during treatments.

Do you need help with after installation?

For full technical diagrams and safety warnings, you can refer to the Wella Climazon 2 Operating Instructions or the Acrobat 2004 Wall Arm Installation Guide . To provide more specific help, let me know: Are you installing the or stand version? Slide the device head onto the arm's pin

For wall-mounted versions, the wall must be solid (concrete or reinforced studs) to support the weight and movement of the Acrobat 2004 Wall Arm . Installation Steps 1. Pedestal (Stand) Version

You have assembled and wired the unit. Now, let’s power it on.

) is a cornerstone of modern salon technology, designed to speed up processing times for color and treatments. Whether you are setting up a brand-new salon or upgrading your equipment, installing this high-precision infrared processor correctly is vital for safety and performance. Wella Professionals Pre-Installation Checklist Before you begin, identify your specific model. The generally comes in two versions: Pedestal (Stand) Version : Uses the ST5 Pedestal , which includes a three-roller base and a support tube. Wall-Mounted Version : Requires the Acrobat 2004 Wandarm (Type WA04/75 or WA04/95). Wella Professionals Step-by-Step Installation Guide 1. Mount the Support Structure For Pedestal Units : Secure the appliance head into the Stativ ST5 stand. Ensure the cable holder Re-tighten the base bolts connecting the pillar to

Ensure the power cable is properly secured to the cable holder.

Use a 10mm masonry drill bit to create holes matching the mounting plate template.