Zoje A6000-g 02 Manual [best]

: If your electronic settings get tangled, you can perform a factory reset by holding the "Up" and "Down" keys simultaneously while turning the power on. Zoje A6000-G-02

Pull thread from the overhead cone stand through the top guide holes. Pass it down through the upper pretension guide disk. Route it clockwise between the main primary tension discs.

: Features an inbuilt 500W–550W motor that reduces energy consumption by up to 70% compared to traditional clutch motors. High-Speed Productivity : Capable of reaching speeds up to 5,000–6,000 RPM

Needle is bent or blunt; incorrect needle size for the fabric. zoje a6000-g 02 manual

Use standard industrial-grade white sewing machine oil (Defoamer/White Oil #10).

Fill until the oil level sits precisely between the and LOW reference marks.

The panel allows the machine to be reset to factory settings if errors occur. Threading the Machine : If your electronic settings get tangled, you

The A6000-G/02 is typically sold in two ways:

Set the value parameter to 1 for (ideal for rapid workpiece removal at the end of a seam). Maintenance and Calibration Controls

Press the pedal; the bobbin winds automatically and stops when full. Route it clockwise between the main primary tension discs

For advanced diagnostic assistance, parts catalogs, or digital manual copies, refer directly to authorized customer support through the official ZOJE Sewing Technology Co., Ltd portal. Tech Docs-ZOJE Sewing Technology Co., Ltd

Regularly check the oil gauge. If the oil level drops below the "Low" mark, refill it immediately.